35/F, Central Plaza, 18 Harbour Road, Wanchai, Hong Kong

Operation Time Mon to Fri: 9:00 AM to 6:00 PM
Contact Us (852) 2824 8422

WaveStation 2812-N

Newbridge WaveStation 2812-N Wi-Fi Access Point

Aesthetic Design, 802.11n Wireless Access Point specifically designed

for Hotel In-Room Wi-Fi 

Newbridge WaveStation 2812-N is the indoor wall mount wireless access point developed by Newbridge. It supports both FAT and FIT modes. As a FAT AP, WaveStation 2812-N can run in standalone mode while as a FIT AP, WaveStation 2812-N must be used together with wireless controller.

WaveStation 2812-N is wall mount indoor Access Point specific designed for Hotel, Apartments, Small office Home Office (SOHO) or multi-tenant building who wants to have its own private Wi-Fi access point instead of sharing with others. Design with industry standard 86mm (H) x 86mm (W) x 43mm (D), the Access Point can be easily mounted to the junction box inside the room hence does not destroy the original interior decoration design, yet fast and easy to install and maintain.

Traditional AP deployments at corridor often result poor signal quality in the school hostel, hospital and hotel rooms. With WaveStation 2812-N indoor installation, it greatly resolves the issue caused by channel overlapping and poor signal, reduce installation and operation costs.

Built-in IEEE 802.11b/g/n 2×2 MIMO wireless module supports up to 300Mbps data rate, which can provide wireless access for laptops, tablet PCs, smart phones and other wireless terminals.

WaveStation 2812-N uses the industry best chipset and component in order to provide excellent performance and competitive price. Designed with plastic casing, built-in antenna, and outstanding wall mount design. Excellent thermal design ensures reliable operation.

WaveStation 2812-N uses green energy-saving design, the whole power consumption typical at 3 Watt, supports PoE uplink and Ethernet LAN port to power IP device, such IP Phone or any POE registered class 1 /class 2 devices.

Centralized Management

If the WaveStation 2812-N is used with wireless controller as a FIT AP, most of management packets and data packets are processed by the Newbridge WaveController. The WaveController controls all FIT APs by using the CAPWAP so that status of all devices can be known about clearly. Compared to a traditional FAT AP, a FIT AP and a wireless controller greatly help system administrators to manage the whole network.

Automatic Version UpgradeThe WaveStation 2812-N can automatically communicate with the WaveController in a network, and download the latest software versions to the AP. Such operations do not require manual intervention, thus reducing workload of network maintenance. This feature is especially important to a large-sized network.   

Multicast Traffic Optimization

The WaveStation 2810-N Access Point Support Internet protocol TV/SMATV multicast traffic. With IEEE Standard 802.1Q MVRP (Multiple VLAN Registration Protocol) and MMRP (Multiple MAC Registration Protocol) to provide dynamically share VLAN information and configure the needed VLANs allow multicast traffic in bridged LANs to be confined to areas of the network where it is required.


The WaveStation 2812-N supports the IPv4/IPv6 protocol stack. It can be connected to WaveController through an IPv6 network. As a result, the networking mode is more flexible, future network development needs are met, and investment of customers is protected. Also, the WaveStation 2812-N enables wireless users to access networks over IPv6.

Excellent and Secured wall mount design

Using industry standard 86mm standard panel, this can easily install on the network port junction box room. Built-in 2×2 MIMO antenna design, provide excellent design.

Enhanced RF technology

Support maximum transmit power of 20dBm, provides greater coverage, reducing deployment density. Improved receiver sensitivity, provide better communication with the tablet, mobile phones and other handheld devices.

Flexible interface design

Offer two Ethernet uplink options, RJ45 connector and 8 pin wire interfaces, provide flexible installation. RJ11 pass through port provides connectivity for analog or digital phones. The Wall Plate Access Point also builds in 1-port RJ45 POE LAN ports to connect wired laptop, workstations or IP phone. Power up IP Phone by using UTP cable and eliminate additional power point required for IP phone.

High level of Protection Design

IP31 waterproof and dustproof protection design, provide high reliability design.

Energy efficient design

Typical power consumption at 3W, provide low power and energy efficient.

Easy to use and easy maintenance

Under distributed deployment, WaveManager can be used to unify wireless access point software. Under centralized deployment, WaveController allow unified configuration, RF strategic planning and software version upgrades. Both distributed and centralized deployment can be used to detect AP failure through the WaveManager software, hence reduce resolution and troubleshooting time.

Supporting user isolation policy

The WaveStation 2812-N support wireless user isolation from another. After this function is enabled, the two wireless clients cannot directly communicate with each other so that they are shifted to access the upstream wireline network. With this function, operators can force wireless users to be charged or authenticated on the specified gateway or server, thus providing hot spot applications.

Real View of the WaveStation 2812-N

Radio Pattern



*Maximum power varies by countries

Download Product Datasheet: Click Here

Copyright © 2019 Newbridge Technologies International Limited. All rights reserved.