35/F, Central Plaza, 18 Harbour Road, Wanchai, Hong Kong

Operation Time Mon to Fri: 9:00 AM to 6:00 PM
Contact Us (852) 2824 8422

WaveStation 2922

Newbridge WaveStation 2922 AC Dual Band Wi-Fi Access Point

Aesthetic design, 802.11n and 802.11ac dual band wireless access point specifically

designed for Hotel In-Room Wi-Fi Service

WaveStation 2922 is the indoor wall mount wireless access point developed by Newbridge. It supports both FAT and FIT modes. As a FAT AP, WaveStation 2922 can run in standalone mode while as a FIT AP, WaveStation 2922 must be used together with wireless controller.

WaveStation 2922 is wall mount indoor Access Point specific designed for Hotel, Apartments, Small office Home Office (SOHO) or multi-tenant building who wants to have its own private Wi-Fi access point instead of sharing with others.

Purposed designed with industry standard 86 mm width faceplate wall mount type,  the Access Point can be easily mounted to the junction box inside the room hence does not destroy the original interior decoration design, yet fast and easy to install and maintain.

Traditional AP deployments at corridor often result poor signal quality in the school hostel, hospital and hotel rooms. With WaveStation 2922 indoor installation, it greatly resolves the issue caused by channel overlapping and poor signal, reduce installation and operation costs.

WaveStation 2922 support 802.11a/b/g/n/ac protocol standard, built-in IEEE 802.11ac 2.4 GHz and 5 GHz 2x2 MIMO RF radio frequency, support up to 1.167 Gbps data transfer rate.

WaveStation 2922 uses the industry best chipset and component in order to provide excellent performance and competitive price. Designed with plastic casing, built-in antenna, and outstanding wall mount design. Excellent thermal design ensures reliable operation.

WaveStation 2922 uses green energy-saving design, the whole power consumption typical at 8 Watt, supports PoE+ uplink and Ethernet LAN port to power IP device, such IP Phone or any POE registered class 1 /class 2 device.

Supporting centralized management

If the WaveStation 2922 is used with wireless controller as a FIT AP, most of management packets and data packets are processed by the Newbridge WaveController. The WaveController controls all FIT APs by using the CAPWAP so that status of all devices can be known about clearly. Compared to a traditional FAT AP, a FIT AP and a wireless controller greatly help system administrators to manage the whole network.

Supporting automatic version upgrade

The WaveStation 2922 can automatically communicate with the WaveController in a network, and download the latest software versions to the AP. Such operations do not require manual intervention, thus reducing workload of network maintenance. This feature is especially important to a large-sized network.

Multicast Traffics Optimization

The WaveStation 2810-N Access Point Support Internet protocol TV/SMATV multicast traffics. With IEEE Standard  802.1Q MVRP (Multiple VLAN Registration protocol) and MMRP (Multiple MAC Registration Protocol) to provides dynamically share VLAN information and configure the needed  VLANs allow multicast traffic in bridged LANs to be confined to areas of the network where it is required.

Supporting IPv6

The WaveStation 2922 supports the IPv4/IPv6 protocol stack. It can be connected to WaveController through an IPv6 network. As a result, the networking mode is more flexible, future network development needs are met, and investment of customers is protected. Also, the WaveStation 2922 enables wireless users to access networks over IPv6.

Excellent and secured wall mount design

Using industry standard 86mm standard panel, this can easily install on the network port junction box room. Built-in 2x2 MIMO antenna design, provide excellent design.

Enhanced RF technology

Support maximum transmit power of 20dBm, provides greater coverage, reducing deployment density.

Improved receiver sensitivity, provide better communication with the tablet, mobile phones and other handheld devices.

Flexible interface design

The Access Point also a wall mount switch that comes with total 4-ports:

  • 1-port 10/100/1000BaseT, RJ45 for PC/Notebook
  • 1-port 10/100BaseT, RJ45 for IPTV/SMATV
  • 1-port 10/100BaseT with POE , RJ45 for IP Phone
  • 1-port RJ45 pass through for Analog Phone or direct Switch port for IPTV/SMATV.

High level of protection design

IP31 waterproof and dustproof protection design, provide high reliability design.

Energy efficient design

Typical power consumption at 8W, provide low power and energy efficient.

Easy to use and easy maintenance

Under distributed deployment, WaveManager can be used to unify wireless access point software.

Under centralized deployment, WaveController allow unified configuration, RF strategic planning and software version upgrades.

Both distributed and centralized deployment can be used to detect AP failure through the WaveManager software, hence reduce resolution and troubleshooting time.

Supporting user isolation policy

The WaveStation 2922 support wireless user isolation from another. After this function is enabled, the two wireless clients cannot directly communicate with each other so that they are shifted to access the upstream wireline network. With this function, operators can force wireless users to be charged or authenticated on the specified gateway or server, thus providing hot spot applications.





*Maximum power varies by countries

Download Product Datasheets: Click Here

Copyright © 2019 Newbridge Technologies International Limited. All rights reserved.