Newbridge WaveStation 3933 is the indoor wall/ceiling mount wireless access point delivers high performance by integrating 2 (2.4 GHz and 5 GHz) modular radios. As a FAT AP, WaveStation 3933 can run in standalone mode while as a FIT AP, WaveStation 3933 must be used together with wireless controller.
WaveStation 3933 designed with enhanced RF transmission technology, provides greater coverage and higher signal quality, and can be widely used in carrier, enterprise, industry and other markets.
WaveStation 3933 supports 802.11a/b/g/n/ac protocol standard, built-in IEEE 802.11ac dual-band 2.4 GHz 3x3 MIMO at 450Mbps throughput and 5GHz 3x3 MIMO at 1300 Mbps throughput. It is upgradable to 4x4 MU MIMO radio frequency, which based on IEEE 802.11ac wave 2, support up to 1.73Gbps data transfer rate.
WaveStation 3933 uses the industry best chipset and component in order to provide excellent performance and competitive price. Designed with plastic shell and aluminium heat sink, help enhanced cooling effect, built-in antenna, support both ceiling and wall installation. Using elegant flying saucer design, multi-vents designed to effectively remove heat, extend equipment life.
WaveStation 3933 uses green energy-saving design, providing 1000mW transmit power at the same time, the whole power consumption of less than 16W, supports PoE+ power input.
- Interchange mode between FAT and FIT AP
- Enhanced transmit power and receive sensitivity
- Dual 3x3 802.11ac offers total throughput up to 2600 Gbps
WaveStation 3933 support spectrum radio navigation feature which guide and initiate association with dual-band client. When 5 GHz RF having less online client, dual band client will be redirect to the 5 GHz radio. Same apply to 2.4 GHz RF, when 2.4 GHz RF having less online client, dual band client will be redirect to the 2.4 GHz radio.
Multicast optimization convert multicast packet of destination address into unicast packet. With this wireless forwarding, it helps achieve high speed forwarding multicast members, optimized wireless multicast data forwarding.
Client roaming can be navigating through reject weak signal access and clients reconnect trigger features. Reject weak signal access can effectively prevent the access of client with weak signal, purpose of doing so is to guide the client is associated to a stronger RF signal. When a wireless client moves from one coverage area to another RF coverage area, original coverage signal will become less, which caused degrade network connectivity. Client reconnect trigger help initiate and trigger the client connect to a stronger RF signal.
Enhanced RF technology
Support maximum transmit power of 30dBm (EIRP), provides greater coverage, reducing deployment density. With high-gain internal antenna, covering more than 900 square meters meeting place and studio. Improved receiver sensitivity, provide better communication with the tablet, mobile phones and other handheld devices.
High performance. Use IEEE 802.11ac 3x3 MIMO wireless module, and support upgradeable 4x4 MU MIMO to give maximum data transfer rate up to 1.3 Gbps per 5 GHz Radio, 450 Mbps per 2.4 GHz Radio.
Dynamic rate limit
Supports automatic adjustment of rate limit based on the number of online clients, increase or decrease of client will have readjustment of rate limit.
Supporting user isolation policy
The WaveStation 3933 support wireless user isolation from another. After this function is enabled, the two wireless clients cannot directly communicate with each other so that they are shifted to access the upstream wireline network. With this function, operators can force wireless users to be charged or authenticated on the specified gateway or server, thus providing hot spot applications.
2.4 GHz Radio Signal Coverage Pattern
5.0 GHz Radio Signal Coverage Pattern
Download Product Datasheet: Click Here